3D CONCRETE PRINTERS – 3D PRINTING

3D CONCRETE PRINTERS

ZCC 1214 JH

Print Dimensions: Arm span 1000 x 2000 X1400mm. Machine Size : 1100 x 2300 x 1800mm H
Nozzle specifications: 15, 20.0, and 25.mm.
Materials: soft materials such as concrete & geopolymer
Layer thickness: 3.0-10.0mm
Printing speed: 0-100mm/s
Feeding method: pumping
Track type: belt type, lightweight, and wear-resistant
Lightweight design for easy transportation
The machine structure is a single cantilever structure (SCARA)
LiDAR automatic detection and adaptive adjustment of discharge
Equipped with automatic feeding function: capable of automatic detection and PID control to automatically adjust the feeding speed
Supporting automatic batching and mixing system: automatic weighing and mixing of powder and liquid materials, enclosed structure with dust removal system, and the entire process is automatically adjustable
A red emergency stop safety switch is required

Nozzle specifications: 10.0, 15.0, and 20.0mm
Materials: soft materials such as concrete and geopolymer
Molding layer thickness: 3.0-20.0mm
Printing speed: up to 350mm/s
The screw thread is a 3D curved screw, non sheet welding Feeding methods: manual feeding and pumping
For ease of cleaning, the extruder can be quickly split into 4 or more sections, all of which use quick interfaces instead of screws for fixation
Equipped with infrared heating function to accelerate concrete curing and print fine height models
Extruder capacity greater than 3L
Four screw rods+light rod structure
Comes with triangular and rectangular nozzles
After printing, the bottom plate can be replaced with a forklift to quickly continue printing
Four axis linkage in the Z-axis direction is controlled by one motor for easy maintenance
Equipped with automatic feeding function: capable of automatic detection and PID control to automatically adjust the feeding speed
Supporting automatic batching and mixing system: automatic weighing and batching of powder and liquid materials, automatic cleaning, enclosed structure with dust removal system, automatic control and adjustable throughout the entire process

Print Dimensions: 2000x5000x2000mm
Materials: soft materials such as concrete and geopolymer
Nozzle specifications: 10.0, 15.0, and 20.0mm
Molding layer thickness: 3.0-20.0mm.
Printing speed: up to 300mm/s –
The screw thread is a 3D curved screw, non sheet welding
Mechanical arm has 6 degrees of freedom; – Extruder capacity greater than 3L
Sliding rail length 5 meters + Comes with triangular and rectangular nozzles
The robotic arm is 1.8 meters long; Load capacity 20kg; land occupation: 2500 * 6500 *2500mm.
Feeding method: manual feeding is possible, and a pumping machine interface is reserved at the same time
Printing can be quickly resumed after completion
For ease of cleaning, the extruder can be quickly split into 4 or more sections, all of which use quick interfaces instead of screws for fixation
In addition to 3D printing function, the software can also expand the following functions: robot milling, sawing, laser cutting, engraving, welding, spraying, polishing, blade cutting and milling, etc
Equipped with automatic feeding function: capable of automatic detection and PID control to automatically adjust the feeding speed
Supporting automatic batching and mixing system: automatic weighing and batching of powder and liquid materials, automatic cleaning, enclosed structure with dust removal system, automatic control and adjustable throughout the entire process